Showing posts with label Recording Studio. Show all posts
Showing posts with label Recording Studio. Show all posts
Harmonica.
Diatonic and chromatic harmonica, diatonic or chromatic harmonica for beginner, diatonic harmonica chromatic scaleThere are two main types of harmonicas (sometimes called "harps"), the chromatic harmonica and diatonic harmonica. Although the chromatic is extremely versatile, the harmonica which is mostly used in blues, rock, country and folk is called the diatonic harmonica ("blues-harp"). The chromatic harmonica is mostly used for jazz, classical, and pop music. It has a button on the side which allows you to play the normal major scale, and with the button depressed, gives you all the half steps or notes in between. This allows you to play any scale, in any key, but you can't bend notes very well on this instrument so you don't get the same "bluesy" sound as on the diatonic. The chromatic harmonica hole layout is similar to the diatonic hole layout, but not the same, so song tablature is different. Some chromatic harmonica- players are Stevie Wonder, Toots Thielemans, and Larry Adler. The diatonic doesn't have easy access to all the possible notes like the chromatic harmonica but many of the notes that are not naturally found can be acquired by "bending" certain draw (inhale) and blow (exhale) notes. It is the "bending" sound of the diatonic that attracts most people to it. Some diatonic harmonica-players are Bob Dylan, Neil Young, James Cotton, Sonny Boy Williamson, Mick Jagger, Little Walter, Paul Butterfield, Mickey Raphael, John Popper, Charlie Musselwhite, Huey Lewis, Jimmy Reed, Sonny Terry, Steven Tyler, and so on.
diatonic harmonicachromatic harmonica
A diatonic 'Hohner marineband' bluesharpA chromatic 'Hohner Chromatica' harmonica

Cleaning

Some harp-players clean their 'harps' often, some never. Most of the time the harmonica wears out before it even needs some heavy cleaning. If someone else used your harmonica, or it was on the shelf for a long time, it's a good thing to do. If your harmonica is chromatic stay away from water! There are specific cleaning instructions for chromatic harmonica's. If your diatonic harmonica has a plastic comb (versus a wood or metal comb), you can do a quick cleaning by running luke warm water through it and then rapping it firmly (mouthpiece side down) against your leg or palm to knock out the excess water.
For a more thorough cleaning, disassemble the cover plates, reed plates, and comb. You may clean the plastic comb with warm water, soap, and an old tooth brush. If your comb is made of wood, skip the water and soap and merely rub it down with the old toothbrush. If your comb is metal, be sure to dry it thoroughly upon completion ot avoid rust and tarnish. Clean the reed plates with warm water and soap and your fingers. Don't wash the reed plates with an old toothbrush. Dry as completely as possible before re-assembly. A good way to clean the reed plates is with q-tips and Hydrogen Peroxide Solution, this will sanitize, clean, disinfect, and is perfectly safe. Then re-attach the reed plates back on the comb and replace the cover plates.

Problems

If a note which previously worked now refuses to sound, then something is caught in the reed. This is often just excess moisture from your mouth. Tap the harmonica mouthpiece firmly on the palm of your hand, then breath in and out rapidly over the blocked hole. If the note remains blocked then try a wooden toothpick or open the harp and push the reed, which gives problems, gently with the wooden toothpick.
If a note only works with a light breath pressure: then the "gap" between the tip of the reed and the reed plate is too small. To increase the gap (and solve the problem) remove the cover plates, take a wooden toothpick and press gently on the middle of the reed, pushing it away from the reed plate. The gap only needs to increase slightly for the problem to be fixed. Be sure not to push too hard on the reed, you may damage it.
If one of the notes on your instrument suddenly sounds bad, then it is probably is bad. Eventually one of the reeds will develop a slight crack, the note will become lower, the instrument will sound bad as a result. If played regularly a harmonica should last between 6 months and a year before this happens. Unfortunately, once this problem occurs your harmonica is broken, and must be replaced. It is possible to replace the broken reed, however this is a task for a skilled technician. The cost for installing a new reed usually exceeds the cost of a replacement instrument.

Modifications

The popularity of the harmonica and spread of the Internet has made finding qualified harmonica repair and modification specialists much easier. There are now numerous folks throughout the USA and the world that can take a standard diatonic or chromatic and make it play better. The most common and useful mod is done to upgrade a Hohner Marine Band by sealing the comb and adding screws to make it more airtight. A result is that notes are easier to bend. Arcing means getting rid of the arc the manufacturer has put on the reed. Corner Rounding is when the corners of the edges along the side of the reed are rounded. Apparently this makes it easier for the reed to swing back trough the plate, thus causing it to react better to the player. Other mods are Waxing the Rivet End, Embossing, Tip Scooping and Replacing the weighted reed. Read more here.

Positions

The circle of fifthDifferent playing positions allow us to play in different keys on a single diatonic harmonica. Since there are 12 keys (G, A, Bb, B, C, etc), there are (in theory) 12 different positions on a harmonica. If you play in the key of C on a C harmonica (called straight harp) you play in first position. Second Position is called cross harp, in this position, the song is in C, then your harmonica-key is a F. Cross-harp is for 95% used in the blues. There are unlimited ways to tune a diatonic harmonica. The standard is Richter tuning. If you want good information about more harmonica theory look here. Detailed information about positions can be found here.

Bending

Bending is a technique used to change the pitch of a note and so reach notes that are not on a diatonic harmonica, For example, if you take the fourth hole on a key C harmonica, the blow note is a C and the draw note is a D. It is possible to play a C# by bending the 4 draw down by one half tone. This is accomplished by using a combination of your tongue, throat and lungs to vary the pressure of the air across the reed. Read more about it here.

Amplified

The traditional Chicago Blues harmonica sound was shaped by players such as Little Walter, Big Walter Horton and Sonny Boy Williamson 1. They and many who've followed in their stead generally used Bullet microphones. Initially this may have been because they were ubiquitous at the time, and could be bought at the local pawn shop for a few bucks. But whatever the reasons, those dirty cheap bullet mics are now a part of the traditional Chicago blues amplified harp sound. Read more about microphones here and here about Tube amps.
shure microphonefender amp
A chromed bullet 'Shure' microphoneThe popular tube amp 'Fender Bassman '59'

Some tips

Keep your reeds clean: don't eat and play your harmonica. Keep your harmonica in the box or in some other clean place if you aren't playing. Tap your harmonica out gently after playing, tapping out the excess saliva.
Antelope Audio has a strong background in digital audio equipment manufacturing. We are dedicated to helping people achieve high-definition sound both in the recording studio and home environment.

We pioneered the adoption of Atomic clock generators in Audio Master Clocks. Now we implement pro audio technologies in a product line of USB D/A converters (DACs), targeting both audiophiles and professionals.

Our digital audio gear cater both for the professional and audiophile community, providing high-definition audio thanks to the proprietary 64-bit Acoustically Focused Clocking (AFC) and Oven Controlled Jitter management.

Leading professional audio gear manufacturer Antelope Audio announced that its widely anticipated Zen Studio multi-channel recording interface is now shipping. Priced at $2,495, Zen Studio is a multi-faceted, portable audio interface with best-in-class analog and digital connectivity. Measuring just 16.8" / 418 mm wide and constructed in an attractive and durable housing, the Zen Studio delivers 'world class' capabilities to audio professionals who want to capture outstanding, studio-quality recordings in any location.
 
A fully featured recording interface complete with Antelope's industry standard clocking technology and a built-in monitoring section, Zen Studio consists of 12 studio grade mic pres, on-board DSP effects and the company's proprietary low-latency USB connectivity — all in a package that can easily fit inside a backpack. Zen Studio is perfectly suited for traveling musicians, location sound engineers, field recordists and producers seeking the ultimate in portability and sound quality.
 
Supreme sound

While the Zen is diminutive in size, it delivers stunning audio quality with 12 studio grade microphone preamplifiers, Antelope Audio's Acoustically Focused Clocking jitter management algorithm and A/D & D/A conversion technology. This combination makes it the most authentic analog-sounding interface on the market. The unit's custom USB and conversion technologies are identical to that of the top-selling 32-channel Orion32 interface, which is a centerpiece in the playback rigs for artists such as Rihanna, Jay-Z and Justin Timberlake, and integral to the mixing and mastering studios of engineers like Eric Sarafin (aka Mixerman), Brian Vibberts, Howie Weinberg or electronic music producers like Robert Babicz and Dusty Kid.

Power and flexibility
In addition to world class, studio-grade audio quality, Zen Studio offers an extremely powerful DSP, based on a custom FPGA device with massive parallel processing capabilities. This allows fast and easy simultaneous processing of multiple effects, enhancing the workflow like no other device on the market.

Unrivalled versatility
All audio I/O is available simultaneously for a total of 38 possible input and 14 outputs (including headphone outs), plus 24 simultaneous I/O channels via custom USB, supporting 24-bit, 192 kHz audio. Users can create up to four independent zero-latency mixes assignable to any outputs, including the two independent headphone outputs and monitor outputs. The unit is fully controllable using an intuitive desktop application on both PC and Mac, offering flexible signal routing and DSP-based effects along with custom presets.

Zen Studio delivers unparalleled quality and portability for the modern recordists. Its feature set makes it flexible for almost any recording and playback application, and its size makes it suitable for just about any location. For more information, please visit the Antelope Audio site at http://www.antelopeaudio.com.

About Antelope Audio
Antelope Audio is a leading manufacturer of master clocks, A/D & D/A converters and the pioneer in the adoption of Atomic clock generators.
The company utilizes Igor Levin's more than 20 years’ experience in digital audio to develop professional and consumer high-end products with the signature Antelope Audio sound. The company employs proprietary clocking and jitter management technologies as well as custom-designed circuits to provide both professional audio engineers and music aficionados with unprecedented musicality, sound stage and clarity.

Antelope is the first to design a 32-channel AD/DA USB audio interface and extremely precise master clock in only 1U. Orion32 is a BREAKthrough technology, offering both studio and live-recording audio engineers great productivity and flexibility.

The company's customers include many Grammy award-winning sound engineers and some of the most renowned recording, mastering and post-production facilities around the globe.